Technical Data

          MODEL TMG-010

Power Fail Protection Automatic arm raise on power failure.

Power Requirements:  

• Voltage 115V AC+/-10%, Optional 230V. AC
  

• Frequency 60 Hz single phase, (50 Hz 230V.)
  

• Current Consumption 80 VA typical.

Environmental Splash proof housing IP55. Conformal coating on printed circuit boards

Operating Temperature 14° to 131° Fahrenheit (-10° to 55° Centigrade).

Cabinet

Material :
0.064in. (1.6mm) galvanized steel. Stainless steel 3CR 12 optional.
Finish Epoxy powder coated (exterior grade).

Standard Color : 
White     Other colors available on request.

Dimensions :
35 in. (H) x 13.5 in. (W) x 15 in. (D) (885mm x 345mm x 380mm)

Access :
Side Door 27in. (H) x 10in. (W), (690mm x 260mm) hinged and lockable.
Lid Top lid, internally double latched, removable.

Mounting Method :
Bolt down, using four anchor bolts.

Barrier Arm

Material :
Extruded aluminum tubing. Break-away and Wood Arm
Adapter available.  (Optional wood arm adapter up to 12' max length.)

Finish :
White epoxy powder coated, wrapped with 2 in. (50mm) spiral
red tape. Weight 0.54 lbs per foot (0.81kgs per meter). 

Dimensions :
3 in. (76.2mm) outside diameter, 0.05 in. (1.27mm) wall thickness.

Lengths:

•    TMG-10' (3m) 10 ft. (3m)

•    TMG-12' (3.66m) Up to 12 ft. (3.66m)

•    TMG-15' (4.5m) Up to 15 ft. (4.5m)

•    TMG-20' (6m) Up to 20 ft. (6m)

Articulation Optional articulated knuckle (jack-knife) assembly available for

TMG-10 models only.  Arm Height Center line to barrier base, 32 in. (820mm)

Drive Mechanism

Motor :

• Torque motor/gearbox combination.

• Output Torque 20Nm approximately.

• Shaft speed 10 RPM. under load. (Optional 25 RPM. under load)

Raise/Lower Time Approximately 2.5 seconds for 90 degree travel.    

(25RPM approx. 1.2 seconds for 90° travel

max. arm length 12').

Mechanism Mounting Single removable drive/motor assembly.

Arm Arc :
Travel 90 degrees.

Arm Drive :
Offset lever arm drive reduces 180 degree travel to 90 degree travel at arm pivot, overcenter, locked in raised and lowered position while

under power.

Arm Damping :
Polyurethane buffer end stops.

Arm Counterbalance :
Dual adjustable counterbalance tension springs, according to length of arm.

Reversible Option :
Configurable for reverse operation, left or right.

Inductive Loop Detectors

Type :
Bulwark 12-009 BE single channel 12/24V, 110V.

Functions :
Automatic closing, arming or auxiliary.

Tuning Method :
Automatic environmental tracking.

Packaging Excluding Arm

Shipping Weight :
139lbs, (63kgs) gross

Dimensions :
40 in.(H) x 17 in.(W) x 22 in.(D). (1016mm x 432mm x 559mm).

Weight Excluding Arm :
123 lbs (56kgs).